• On sale!
Renault ECU tool - Interface reading,...

Renault ECU tool - Interface reading, modification, programming, reset, auto ECU remapping - CAN + K line - Immotools

RCKL
€550.00

A musth have tool for Renault cars electronic control units reprogramming 

Software V2.98 

Software V2.98 supports:

EDC16 SW_1037509411 added (NEW!)
Dacia 2012+ PINCODE read after virgin BCM learning - fixed (NEW!)
EDC17 ISK calculation when ISK is not encrypted - fixed (NEW!)

  • ISK from ECM dump. Sagem/Valeo S3000 added (NEW!)
  • AES CRYPTO_KEY calculation from PINCODE for Dacia 2012+/Clio IV/Trafic III/Master IV/Twingo III (NEW!)
  • ABS/ESP (ATE) for X91/X95/X38/L70. EEPROM R/W, Change VIN, Change KM by OBDII - Clear Immo Code, Change VIN by OBDII (NEW!)
  • EDC17 / SID305-310 / DCM3.4 / EMS31XX MILEAGE REPAIR by OBD II
  • EDC15C3 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • EDC15C13  - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • SIRIUS 31H  - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • SIRIUS 32[N] (both CAN-BUS and WIRE immo systems) - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • SIRIUS 34 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • SIRIUS 35  - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • EMS3132 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • EMS3134 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • SID301 - Read/Write EEPROMRead/Write FLASHClear Immo Code, Clear IMPACT DETECTED, Read stored mileage
  • SIM32 - Read/Write EEPROMRead/Write FLASH from HD64F7055Clear Immo Code
  • SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector) - Read TMS374 EEPROMClear Immo Code (car runs without immobilizer code)
  • IAW 6R.20 - Read/Write TMS370 EEPROM
  • IAW 6R.30 - Read TMS370 EEPROMClear Immo Code  (car runs without immobilizer code)
  • VALEO BII for ESPACE III - Read/Write (9)08AZ60 EEPROMRead/Write mileageClear for Replacement, Read transponder data, Emergency Startup
  • VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Read transponder data, Configure, Reset to VIRGIN
  • VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - Read PINCODE, Reset to VIRGIN
  • INSTRUMENT CLUSTER for ESPACE III (1998-2002) - Reset odometer, Erase RF remote programming  by instrument cluster connector
  • SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) - Read/Write 68HC05B16 EEPROM, read transponder data
  • INSTRUMENT CLUSTER for ESPACE IV Ph1 ('03-'04) K-Line - Change language and units, Change VIN, KM, Read/Write EEPROM
  • INSTRUMENT CLUSTER for ESPACE IV Ph2-Ph4 ('2005+) CAN - Change language and units, Change VIN, KM, Read/Write EEPROM
  • SIEMENS UCH for MEGANE/SCENIC I Ph2 ('99-'02) - Read/Write 705B32 EEPROMRead/Write configurationLearn Keys, Reset to VIRGIN
  • SIEMENS UCBIC for MEGANE/SCENIC I Ph1 ('96-'98) - Read/Write 68HC05B16 EEPROMRead/Write configurationResest to VIRGIN
  • LAGUNA II, ESPACE IV, VELSATIS Ph1/Ph2 - KeyCard Programming, Change VIN. Reset UCH to VIRGIN, Learn UCH 
  • MEGANE II, SCENIC II Ph1/Ph2 - Card/UCH/ECM/ESCL Learning, Change VIN, Reset UCH to VIRGIN, Config TPMS
  • INSTRUMENT CLUSTER for SCENIC II ('04-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM
  • INSTRUMENT CLUSTER for MEGANE II ('03-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM
  • CLIO II Ph1 - Key Learning, Configuration, Reset BMT to VIRGIN
  • CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-'07) - Read/Write EEPROM 93C66, Key Learning, Change VIN, Reset UCH to VIRGIN, Learn UCH
  • KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO ('07-) - Key Learning, Change VIN, Reset UCH to VIRGIN, Learn VIRGIN UCH
  • KANGOO II (2007-2012) - Key Programming, Change VIN, Reset BCM to VIRGIN, Learn VIRGIN BCM
  • MODUS / CLIO III ELECTRIC POWER ASSISTED STEERING (TRW DAE/PAS) - Clear Immo Code, Change VIN by OBDII, erase DF002 from 24C16 dump, repair CRC
  • MEGANE/SCENIC III ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • MEGANE/SCENIC IV (2016+) ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS) - Clear Immo Code, Change VIN by OBDII (NEW!)
  • TWINGO III ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • ESPACE V / TALISMAN / SAMSUNG SM6 ELECTRIC POWER ASSISTED STEERING (TRW EPS) - Clear Immo Code, Change VIN by OBDII
  • CLIO IV ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS) - Clear Immo Code, Change VIN by OBDII 
  • LAGUNA III (2007-2015) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • LAGUNA III / LATITUDE (2007-2015) - Learn BCM / ECM / ESCL in protected mode
  • LATITUDE (2010+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • CLIO III / MODUS - Key Programming, Change VIN, Learn ECM in protected mode, Learn BCM, Reset BCM to VIRGIN
  • CLIO III - Card/UCH/ECM/ESCL Learning, Change VIN, Reset UCH to VIRGIN
  • CLIO IV (2012+)- Card Programming, Change VIN, Reset HFM to VIRGIN, Learn ECM / ESCL/HFM in protected mode
  • MASTER III (2010-2014) - Key Programming, Change VIN, Reset BCM to VIRGIN, Learn VIRGIN BCM
  • TRAFIC II Ph3 (2010-2014) - Key Programming, Change VIN, Reset BCM to VIRGIN, Learn VIRGIN BCM
  • WIND (2010-2013) - Key Programming, Change VIN, Reset BCM, Learn ECM, Learn BCM
  • TWINGO II (2007-2013) - Key Programming, Change VIN, Reset BCM, Learn ECM, Learn BCM
  • TWINGO (2001-2006), LOGAN (2004-2008), SANDERO I, THALIA, SYMBOL - Key Programming, Change VIN
  • LOGAN, SANDERO, THALIA, SYMBOL (2008-2012), Duster (2010-2012) - Key Programming, Change VIN
  • LOGAN, SANDERO, DOKKER, SYMBOL, DUSTER (2012+) - Key/ECM/BCM learning, Reset to VIRGIN, Read DataFlash, Change VIN
  • MEGANE III / SCENIC III (2009-2015) - Card Programming, Change VIN, Reset BCM to VIRGIN
  • MEGANE III / SCENIC III (2009-2015) - Classical Key Programming, Change VIN, Reset BCM to VIRGIN
  • MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learn BCM / ECM / ESCL in protected mode
  • KOLEOS (2008+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN, Learn ECM/BCM/ESCL
  • EDC17 / MED17 TRICORE EEPROM DUMP CRC - Reset EEPROM dump to VIRGIN, repair block CRCs
  • EDC17 / MED17 TRICORE TC1793 EEPROM DUMP CRC - Repair block CRCs
  • EDC16 EEPROM DUMP CRC - Reset EEPROM dump to VIRGIN, repair block CRCs
  • DELPHI DCM 3.4 EEPROM DUMP CRC - Reset EEPROM dump to VIRGIN, Change KM, repair block CRCs
  • DECRYPT ISK FROM ECM DUMP - Get ISK from ECM for VIRGING BCM learning when original BCM is missing (IMPROVED!)
  • SID305/306/307/308/309 TRICORE DFLASH DUMP CRC - Search/change KM, repair block CRCs
  • MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • LAGUNA III AIRBAG (AUTOLIV RC5) - Erase CRASH DATA by OBDII / direct connection
  • TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MASTER III / MOVANO-B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV) - Erase CRASH DATA by OBDII / direct connection
  • AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4) - Erase CRASH DATA by OBDII / direct connection
  • CLIO II X65 AIRBAG (BOSCH AB8) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • CLIO III Ph1 / MODUS Ph1 AIRBAG (BOSCH AB9.X) - Erase CRASH DATA, Erase fault codes by OBDII / direct connection
  • ESPACE III AIRBAG (SIEMENS) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • LOGAN X90 / DUSTER H79 AIRBAG (TEMIC-CONTINENTAL) - Erase CRASH DATA, Read EEPROM by OBDII / direct connection
  • LOGAN X90 AIRBAG (BOSCH AB8.X with yellow connector) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • KADJAR / TALISMAN AIRBAG (AUTOLIV AC7 with MCU XC2336) - Erase CRASH DATA by OBDII / direct connection
  • CLIO IV Ph2 / CAPTUR Ph2 AIRBAG (CONTINENTAL 985100475R, 985101180R, 985103419R with R7F7010133) - Erase CRASH DATA by OBDII / direct connection

Renault ECU tool

The indispensable OBDII tool by Immo-Tool for the management and modification of the internal memory of the electronic control unit of Renault vehicles.

Functions

  1. Reading/writing EEPROM or FLASH
  2. Clearing immobilizer code
  3. Reading immobilizer status and Program Schedules

Advantages

The use of this precious tool does not involve the opening of the control unit, of the memory integrated circuit, neither the welding to connect the system to the control unit of cars.

All its functions are performed via OBDII connector. Furthermore, any control unit supported via manual connection can be connected “on the bench”.

The immobilizer code cancellation function is fully automatic: the control unit can be deleted by just pressing the button. Now the control unit is ready to accept the new immobilizer code after the deletion of the previous code. No subsequent programming is needed.

Supported ECUs

Car ECUs models supported by the software version 2.89 of Renault ECU Tool by Immo-Tools:

EDC15C3 (both CAN BUS and WIRE immo systems)Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
EDC15C13Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
SIRIUS 31HRead/Write EEPROM, Read/Write FLASH, Clear Immo Code
SIRIUS 32[N] (both CAN BUS and WIRE immo systems)Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
SIRIUS 34 (both CAN BUS and WIRE immo systems)Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
SIRIUS 35Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
EMS3132 (both CAN BUS and WIRE immo systems)Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
EMS3134 (both CAN BUS and WIRE immo systems)Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
SID301Read/Write EEPROM, Read/Write FLASH, Clear Immo Code, Clear IMPACT DETECTED, Read stored mileage
SIM32Read/Write EEPROM, Read/Write FLASH from HD64F7055, Clear Immo Code
SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector)Read TMS374 EEPROM, Clear Immo Code (car runs without immobilizer code)
IAW 6R.20Read/Write TMS370 EEPROM
IAW 6R.30Read TMS370 EEPROM, Clear Immo Code (car runs without immobilizer code)
VALEO BII for ESPACE III
Read/Write (9)08AZ60 EEPROM, Read/Write mileage, Clear for Replacement, Read transponder data, Emergency Startup
VALEO IMMOBILIZER for LAGUNA I Ph2 (1998 2000)Read transponder data, Configure, Reset to VIRGIN
VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995 1996)Read PINCODE, Reset to VIRGIN
INSTRUMENT CLUSTER for ESPACE III (1998 2002)Reset odometer, Erase RF remote programming by instrument cluster connector
SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996 1998)Read/Write 68HC05B16 EEPROM, read transponder data
SIEMENS UCH for MEGANE/SCENIC I Ph2 ('99 '02)Read/Write 705B32 EEPROM, Read/Write configuration, Learn Keys, Reset to VIRGIN
SIEMENS UCBIC for MEGANE/SCENIC I Ph1 ('96 '98)Read/Write 68HC05B16 EEPROM, Read/Write configuration, Resest to VIRGIN
LAGUNA II, ESPACE IV, VELSATIS Ph1/Ph2KeyCard Programming, Change VIN. Reset UCH to VIRGIN, Learn UCH
MEGANE II, SCENIC II Ph1/Ph2Card/UCH/ECM/ESCL Learning, Change VIN, Reset UCH to VIRGIN, Config TPMS (NEW FEATURES!)
INSTRUMENT CLUSTER for SCENIC II ('04 '08)
Wake - Up by CAN - BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM (NEW FEATURES!)
INSTRUMENT CLUSTER for MEGANE II ('03 '08)
Wake - Up by CAN - BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM (NEW FEATURES!)
CLIO II Ph1Key Learning, Configuration, Reset BMT to VIRGIN
CLIO II Ph2 5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (07)Read/Write EEPROM 93C66, Key Learning, Change VIN, Reset UCH to VIRGIN, Learn UCH
KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO ('07)Key Learning, Change VIN, Reset UCH to VIRGIN, Learn VIRGIN UCH
KANGOO II (2007 2012)Key Programming, Change VIN, Reset BCM to VIRGIN, Learn VIRGIN BCM
MODUS / CLIO III ELECTRIC POWER ASSISTED STEERING (TRW DAE/PAS)Clear Immo Code, Change VIN by OBDII, erase DF002 from 24C16 dump, repair CRC
MEGANE/SCENIC III ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS)Clear Immo Code, Change VIN by OBDII
TWINGO III ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS)Clear Immo Code, Change VIN by OBDII
CLIO IV ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS)Clear Immo Code, Change VIN by OBDII
LAGUNA III (2007 2015)KeyCard Programming, Change VIN, Reset BCM to VIRGIN
LAGUNA III / LATITUDE (2007 2015)Learn BCM / ECM / ESCL in protected mode
LATITUDE (2010+)KeyCard Programming, Change VIN, Reset BCM to VIRGIN
CLIO III / MODUSKey Programming, Change VIN, Learn ECM in protected mode, Learn BCM, Reset BCM to VIRGIN
CLIO IIICard/UCH/ECM/ESCL Learning, Change VIN, Reset UCH to VIRGIN
CLIO IV (2012+)Card Programming, Change VIN, Reset HFM to VIRGIN, Learn ECM / ESCL/HFM in protected mode
MASTER III (2010 2014)Key Programming, Change VIN, Reset BCM to VIRGIN, Learn VIRGIN BCM
TRAFIC II Ph3 (2010 2014)Key Programming, Change VIN, Reset BCM to VIRGIN, Learn VIRGIN BCM
WIND (2010 2013)Key Programming, Change VIN, Reset BCM, Learn ECM, Learn BCM
TWINGO II (2007 2013)Key Programming, Change VIN, Reset BCM, Learn ECM, Learn BCM
TWINGO (2001 2006), LOGAN (2004 2008), SANDERO I, THALIA, SYMBOLKey Programming, Change VIN
LOGAN, SANDERO, THALIA, SYMBOL (2008 2012), Duster (2010 2012)Key Programming, Change VIN
LOGAN, SANDERO, DOKKER, SYMBOL, DUSTER (2012+)Key/ECM/BCM learning, Reset to VIRGIN, Read DataFlash, Change VIN
MEGANE III / SCENIC III (2009 2015)Card Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III (2009 2015)Classical Key Programming, Change VIN, Reset BCM to VIRGIN
MEGANE III / SCENIC III / FLUENCE (2009 2015)Learn BCM / ECM / ESCL in protected mode
KOLEOS (2008+)KeyCard Programming, Change VIN, Reset BCM to VIRGIN, Learn ECM/BCM/ESCL
EDC17 / MED17 TRICORE EEPROM DUMP CRCReset EEPROM dump to VIRGIN, repair block CRCs
EDC16 EEPROM DUMP CRCReset EEPROM dump to VIRGIN, repair block CRCs (UPDATED!)
DELPHI DCM 3.4 EEPROM DUMP CRCReset EEPROM dump to VIRGIN, Change KM, repair block CRCs
SID305/306/307/308/309 TRICORE DFLASH DUMP CRCSearch/change KM, repair block CRCs
MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL)Erase CRASH DATA by OBDII / direct connection
LAGUNA III AIRBAG (AUTOLIV RC5)Erase CRASH DATA by OBDII / direct connection
TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL)Erase CRASH DATA by OBDII / direct connection
MASTER III / MOVANO B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV)Erase CRASH DATA by OBDII / direct connection
AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL)Erase CRASH DATA by OBDII / direct connection
MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4)Erase CRASH DATA by OBDII / direct connection
CLIO II X65 AIRBAG (BOSCH AB8)Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
CLIO III Ph1 / MODUS Ph1 AIRBAG (BOSCH AB9.X)Erase CRASH DATA, Erase fault codes by OBDII / direct connection
ESPACE III AIRBAG (SIEMENS)Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
LOGAN X90 / DUSTER H79 AIRBAG (TEMIC CONTINENTAL)Erase CRASH DATA, Read EEPROM by OBDII / direct connection
KADJAR / TALISMAN AIRBAG (AUTOLIV AC7 with MCU XC2336)Erase CRASH DATA by OBDII / direct connection (UPDATED!)
CLIO IV Ph2 / CAPTUR Ph2 AIRBAG (CONTINENTAL 985100475R with R7F7010133)Erase CRASH DATA by OBDII / direct connection
14 Items
New product

Renault - All compatible parts

We take care of your satisfaction: for this reason, we try to be as fast and reliable as possible, not only during the product ordering phase on the website, but also during the delivery phase.

During the purchase process you are provided with some useful information:

  • Availability
  • Shipping time
  • Shipping cost
  • Delivery methods

Availability

The availability of the goods is always indicated on the product detail page and in the cart.

Besides the availability, there are also information relating to the expected date of shipment: remember that this date may vary based on the payment method chosen.

There are several levels of availability:

  • Available: the product can be ordered immediately and will arrive to you in a short time.
  • Limited availability: we have a limited quantity of the product in stock. Order it now, so you don't run out!
  • Not available: the product is temporarily out of stock but if you want, we can notify you when it will be available again. Enter your email address and we will notify you as soon as the product is back in the catalogue.

Shipping time

The pages of our catalogue indicate also the expected delivery date for a certain product indicated, next to availability.

In order to establish the date on which the goods are delivered, in addition to availability, you must also take into account the time required to manage the order and the time it takes for the courier to deliver it.

The orders with the fastest delivery are those made with online payment (credit card, PayPal or cash on delivery to the courier) and with the method of delivery by express courier.

How are shipping costs calculated?

The transport cost depends on the weight/volume of the products purchased, but it may vary by selecting additional services, such as delivery to the floor, installation, reprogrammed delivery.

Don't worry, you can constantly monitor the final price since the cost details will always be updated in the cart as you make your choices.

How does delivery work?

The delivery method available at Carelettronica.com is:

  • Express Courier

All products sold on carelettronica.com are new and come with a guarantee.

Our priority is customer satisfaction even after purchase!

Return Conditions

Before returning the goods to Carelettronica.com, be sure to read the conditions of sale.

The customer is required to accurately examine the goods received at the time of delivery and to communicate in detail to Carelettronica.com, within 8 (eight) days of delivery, any defects found - or verifiable - on the outcome of this examination, namely to propose any other complaint in relation to the products.

No item will be returned without the receipt of the return authorization number by Carelettronica.com. This authorization will have a duration of 1 month from its issue. Returns are not allowed for software, for calibration services, for products marked with the "P" symbol and for products related to the extended offer (noncatalog), except for errors not attributable to the Customer. The products to be returned to Carelettronica.com must be packed in such a way as to preserve the integrity of the original packaging. They must not have been used and must be returned in the same conditions in which they were received.

Products returned under warranty

If possible, Carelettronica.com will replace the products, reimburse the relative price or make use of the assistance of partners selected by the manufacturers for the repair of the same, if, despite a correct and diligent use by the customer, defects are found.

How to make a return?

Online

  1. Click on the following link “My Account”.
  2. Once logged in, you will find your order history for the previous 13 months. Select the order
  3. containing the products to be returned and click on the link supplied.
  4. If the order was placed online, you will find all the information already filled in. Check the correctness of the data, select the reason for the return and send your request.
  5. In the case of orders placed by fax, telephone or e-mail, you will be provided with a white form at the bottom of the page, which must be completed with the requested data.
  6. After completing the online return request, you will receive an e-mail notification with the label to be used for the return and the return authorization number to be attached to the goods together with the return note on letterhead.

Email

  1. Email us to info@carelettronica.com indicating the order references, the details of the products to be returned and the motivation.

Telephone

An always friendly and helpful Customer Service will be happy to collect and manage requests for help.

Contact us at +393312362964

Return address

Carelettronica
Via Montello 79
76123 Andria (BT)

Indicate the return authorization number clearly visible on the outside of the package.

Helpline
Call us at +393312362964.

Live chat
Write your questions in the website live chat. One of our qualified technicians will answer you as soon as possible.

Assistance via WhatsApp
Write us your questions on WhatsApp to the number +393312362964.

Assistance via email
Send your request to our e-mail address: info@carelettronica.com.

No reviews

Customers who bought this product also bought:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text